AditudeGear High Visibility Flags
AditudeGear Hi-Vis off road flags and pennants are made from durable polyester fabric with double stitched edges, reinforced fly edge corners and a heavy webbing header.
These flags are suitable as ATV flags as well as RZR, dirt bike, UTV, Sand Rail, golf cart, bicycle flags and other off road vehicles.
Yellow and orange polyester flag fabric takes screen print and heat press vinyl very well***.
When ordered with a pole comes mounted using PVC stoppers which allow your flag to rotate freely in the wind.
Regular casing replacement flag fits up to 3/8 inch pole and comes with PVC stoppers to aid in mounting your flag, XL casing flag fits specialty poles up to 3/4" diameter such as most LED and lighted poles.
Grommet replacement flag comes with two brass grommets and two heavy duty zip ties to aid in mounting your flag.
Rectangle flags approximately 12X18 inches, Pennants approximately 11X17 inches.
***HiVis pink pennant is 600D Cordura Nylon

Made in the USA
$9.95
This item eligible for quantity discounts.
Add desired quantity to the shopping cart to see your discount.
Order this flag mounted on a black fiberglass pole with or without a bolt mount
4ft fiberglass pole with flag
Made in the USA
This item eligible for quantity discounts.
Add desired quantity to the shopping cart to see your discount.
|
6ft fiberglass pole with flag
Made in the USA
This item eligible for quantity discounts.
Add desired quantity to the shopping cart to see your discount.
|
AditudeGear SuperKnit Made in the USA Super Tough Printed OffRoad Flag
Purchase as a replacement flag or have it mounted on one of our fiberglass whips.
Made from a strong UV resistant, highly flexible SuperKnit fabric, edges stitched with a heavy duty outdoor quality, uv resistant thread and finished off with a heavy webbing casing. This double sided flag will be a good choice not only as an ATV flag but also as a 4x4, sand rail, side by side, dune buggy flag or even on road vehicles.
Casing replacement flag fits up to 3/8 inch pole and comes with PVC stoppers to aid in mounting your flag.
Grommet replacement flag comes with two brass grommets and two heavy duty zip ties to aid in mounting your flag.
SuperKnit flags 11x17 inches(measurements approximate and vary slightly).



Order this flag mounted on a black fiberglass pole with or without a bolt mount
4ft fiberglass pole with flag
|
6ft fiberglass pole with flag
|
|
Aditude Gear SuperKnit Double ATV Flag Combo
Order this ATV double flag mounted on a black fiberglass pole with or without a bolt mount
4ft fiberglass pole with double flag
|
6ft fiberglass pole with double flag
|
AditudeGear Light Weight Nylon ATV Flags
AditudeGear Light Weight Nylon pennants are made from durable extra bright and tough coated nylon fabrics with double stitched edges, reinforced fly edge corners and a heavy webbing header.
These flags are suitable as bicycle flags as well as kyak flags, golf cart flags and other slower moving ATV's and off road vehicles.
When ordered with a pole comes mounted using PVC stoppers which allow your flag to rotate freely in the wind.
Casing replacement flag fits up to 3/8 inch pole and comes with PVC stoppers to aid in mounting your flag.
Grommet replacement flag comes with two brass grommets and two heavy duty zip ties to aid in mounting your flag.
Made in the USA
Replacement Flag (no pole)
Order this ATV flag mounted on a black fiberglass pole with or without a bolt mount
4ft fiberglass pole with flag
|
6ft fiberglass pole with flag
|
Solid color multi use flags
Suitable for Bicycles, Golf Carts, safety markers and other slower moving or stationary uses.


Made from flag weight UV stable polyester and measure approximately 12x18 inches, single stitched with heavy duty uv resistant thread and fit poles up to 3/8 inch in diameter.
If you are looking for a flag to customize these bright colored flags are suitable for screen printing or heat press vinyl.
Order this safety flag mounted on a black fiberglass pole with or without a bolt mount
4ft fiberglass pole with safety flag
This item eligible for quantity discounts.
Add desired quantity to the shopping cart to see your discount.
|
6ft fiberglass pole with flag
This item eligible for quantity discounts.
Add desired quantity to the shopping cart to see your discount.
|
|
Bicycle, Golf Cart, multi use flags
flags pictured below
Order as a flag only or add a black fiberglass pole, a bolt mount, or pole and flag only with no mounting hardware.
Replacement flag casing fits up to a 3/8 inch pole.
Flags measure approximately 12x18 inches, pennants 9x14 inches(sizes vary slightly) and are double stitched and when ordered as a combo they are glued securely to the pole.
Flags are colorfast and uv resistant light flag weight fabrics but not made for high speed vehicles.
Flags are printed in China and constructed in the USA, Pennants made in the USA
Order this flag mounted on a black fiberglass pole with or without a bolt mount
4ft fiberglass pole with flag
|
6ft fiberglass pole with flag
|



|
***SAMPLE COMBINATIONS***
Please be sure to choose your flag style from the lightweight polyester flags above.
|
Double Combo
Choose a pennant, solid rectangle or USA flag as your top flag,
bottom flag is one of the flags pictured above.
Flags are mounted on your choice of black fiberglass whip
and can be ordered as flags and pole only or add a bolt mount.
4ft fiberglass pole with flag
|
6ft fiberglass pole with flag
|
|
Fly Aditude with one of our large flags, just the right size to attract attention
or make a big statement on your RV, sand rail, dune buggy or off road vehicle.
Instructions on mounting, flag care and other tips available on our care page.
AditudeGear 2ft x 3ft flags
Made with light, flexible but tough flag weight polyester these flags are UV resistant with reinforced edges, heavy webbing header on both the pole casing style flags to fit up to a 3/8 inch pole or with brass grommets.
Fabric printed in China, flag finished and assembled in the USA
|
USA temporarily out of stock.
|
|
|
Made In The USA Flappin' Flags two sided, 12 x 18 inch printed flag with double stitched edges and brass grommets.
The strong, UV resistant fabric with double stitched edges, heavy webbing header and brass mounting grommets make this a good choice for your ATV, sand rail, RZR, Bicycle, Boat and many other off road vehicles.




$14.95 ea
|



Flappin' Flags two sided, 12 x 18 inch printed flag with double stitched edges and brass grommets.
The strong, UV resistant nylon fabric with double stitched edges, heavy webbing header and brass mounting grommets make this a good choice for your ATV, sand rail, RZR, Bicycle, Boat and many other off road vehicles.
Made in China
$12.95 ea
|

Flappin' Flags two sided, 12 x 18 inch printed flag with double stitched edges and brass grommets.
The strong, UV resistant fabric with double stitched edges, heavy webbing header and brass mounting grommets make this a good choice for your ATV, sand rail, RZR, Bicycle, Boat and many other off road vehicles.
Made in China
$12.95 ea
|
Full size 3ft x 5ft Outdoor quality,weather resistant,
brass grommets and double stitched edges.
|


Flappin' Flags 3ft x 5ft Pirate Flags
Clearance priced at $5.00 to $9.95ea
while quantities last
|
More Flag Pages
These items are sold without warranty, expressed or implied except for quality of construction. No warranty or representation is made as to any product's ability to protect the user from accident or injury. The user/purchaser assumes that risk.
|
|
|
|
|