ATV Whip Poles * Bolt Mounts * Quick Mounts * Fiberglass Pole Parts                        

home | contact | gallery | about | policy   
flags | gear | sale | use & care


PayPal acceptance logo   




Colors on your monitor may not match the product exactly.

Atv flags, dune flags, custom atv, flags off road safety flags
small flags
 
gear
 
quick release mounts
poles, mounts & flag clips
specialty items
 
Atv flags, dune flags, custom atv, flags off road safety flags
large flags
3ft X 5ft & 2ft X 3ft
sand rail flags & dune buggy flags
RV & Toy Hauler flags


Fiberglass Whip Poles



black fiberglass poles

Each pole come complete with a vinyl end cap and two flag stoppers.
We have found that many customers choose to use quick mounts
so we give you the choice to order as a pole only or add a mounting bolt or bracket.

Order this black fiberglass pole with or without a bolt mount

4ft fiberglass pole

4ft black fiberglass whip
Qty:




6ft fiberglass pole

6ft black fiberglass whip
Qty:



Fiberglass Whip Mounting Hardware
quick mounts, mount bolts and brackets

All quick mounts and mount bolts fit standard 1/2 inch mounting tabs. (bicycle bracket excluded)

aluminum quick mount

GLK Aluminum Quick Release

Solid 1 piece aluminum base, low profile
with lock washer, nut & thumb screw.

Available in the extremely hard to find 3/8 size!

GLK Tool and Machine has made these affordable,
high quality quick mounts by special request.

Qty:

Size:

Sorry temporarily out of stock.


atv whip mount bolt

Standard 1/2 inch split bolt 1/4 & 5/16

3/8 mount bolt

Standard glue on 3/8 mount bolt


Split bolt 1 inch long, locking nut, washer, lock washer and lock nut. Special split cut into the bolts threads tightens around the fiberglass whip as the nut is tightened allowing it to be removable.
Fits fiberglass poles 1/4 and 5/16 inch sizes.

3/8 mount bolt includes 3/4 coupler, 1 inch 3/8 bolt, washer and lock washer. Designed to be permanently attached to your 3/8 fiberglass whip.

Qty:

Size:


Bicycle Safety Flag Bracket

* Works with any 1/4" - 7/16" bolt
* Colors: Galvanized silver
* Simple and Easy to install.
* Holds 1/4" diameter flag poles only.
* Mounts to any bicycle rear axle, or any bolt 7/16 of an inch or smaller.
* Flag wedges firmly into bracket.
Installation: Loosen the rear axle nut on the side of your bicycle.
Slide the bracket into place. Adjust the bracket to your desired angle,
and tighten the axle nut firmly.
This will work the same on any bolt that is 1/4 - 7/16 of an inch.

Bicycle Flag Bracket
Price: $3.95
Qty:



Flag Stoppers.

To mount casing style flags to 1/4, 5/16 or 3/8 fiberglass poles.

flag stoppers

Package of 10 grommets for mounting sleeved or casing style flags to your whip.
A small dot of waterproof glue or an extra grommet can be placed if sliding occurs.
For 1/4" 5/16" and 3/8" whips.

bag of 10 stoppers
Price: $2.95
Qty:

Size:


Parts

fiberglass pole ferrule
Aluminum Pole connecting ferrule

Fix broken whips or connect to make longer whips.
Package of 2 for 1/4" 5/16" and 3/8" whips.

Price: $3.49
Package of 2
Qty:

Size:


fiberglass pole vinyl end caps

Vinyl End caps
Package of 5 for 1/4" 5/16" and 3/8" whips.

Price: $1.50
Package of 5
Qty:

Size:


Specialty Flags



Mobility safety flag

Wheelchair scooter safety flag
1/4 fiberglass two piece safety flag and pole.
Designed to mount to a wheel chair, mobility scooter, bicycle or bicycle trailer.
Choose from a bicycle bracket or velcro strips to mount your safety flag to your vehicle.

Velcro strips attach to an upright support tube such as a wheelchair back or scooter arm supports,
fits tube up to 1 1/4 inch in size.
Bottom section of pole is 2 feet in length with a metal ferrule to easily attach top portion,
top portion is 4 foot in length and comes with a
solid color safety flag or a lightweight print flag and extra rubber grommets to stack additional flags if desired.

Samples of print flag available on this page.

$16.95 ea
Qty:

flag color:

mount type:

Replacement flags



100% Polyester Poplin Solid Color Flags

Flag Blanks / Solid Color Printable Flags

***Polyester flag fabric takes screen print and heat press vinyl very well***

AditudeGear Poplin off road flags and pennants are made from flexible, durable polyester fabric, stitched with a very durable nylon heavy duty thread and a finished with a heavy black webbing header.

These flags are suitable as ATV flags as well as RZR, dirt bike, UTV, Sand Rail, golf cart, bicycle flags and other off road vehicles.


Regular casing replacement flag fits up to 3/8 inch pole and comes with stoppers to aid in mounting your flag.
Grommet replacement flag comes with two brass grommets and two heavy duty zip ties to aid in mounting your flag.
Rectangle flags approximately 12X18 inches, Pennants approximately 11X17 inches.
High Visibility orange flag high visibility yellow flag
flourescent pennant flags Atv flags

Made in the USA
$9.95
This item eligible for quantity discounts.

Large quantity orders please read

Qty:
flag print:
Measurements are approximate


Include flag stoppers for pole size:


Your choice of a casing style flag(fits up to a 3/8 inch pole)
or a Grommet style flag with two brass grommets:


**This item is not eligible for coupon discounts**





red safety flag yellow safety flag

Extremely tough vinyl coated mesh flag stands up to high speeds and extreme weather conditions.
The flow through design of the mesh drastically reduces wind drag and flag whip
making it a good choice not only for ATV flags but also for highway and off road vehicles to bicycles, golf carts, kyak,
snowmobile or use as marker safety flags.

Flag measures approximately 8x14, casing fits up to 3/8 whips
and replacement flag comes with rubber o ring flag stoppers to aid in mounting your flag,
please choose your pole size below.

Pics of this flag tested on our Jeep can be found on the gallery page.
Made in the USA

AditudeGear Mesh replacement flags (no Pole)
$4.95 ea

This item eligible for quantity discounts.

Large quantity orders please read

Qty:
**red and yellow are not high visibility colors**
flag color:



Include flag stoppers for pole size:



AditudeGear Mesh Grommet replacement safety flags



mesh atv flag

Extremely tough vinyl coated mesh flag stands up to high speeds and extreme weather conditions.
The flow through design of the mesh drastically reduces wind drag and flag whip
making it a good choice not only for ATV flags but also for highway and off road vehicles to bicycles, golf carts, kyak,
snowmobile or use as marker safety flags.

Flag measures approximately 9x15 with a heavy black header and brass grommets.
Perfect for use on lighted led whips, boats, sand rails, dune buggies, 4x4's or
specialty applications where a casing flag will not fit.
Made in the USA

$5.95ea

Qty:

**red and yellow are not high visibility colors**
flag color:




AditudeGear Mesh extra large casing replacement safety flags



lighted whip replacement flag

Extremely tough vinyl coated fire orange mesh flag stands up to high speeds and extreme weather conditions.
The flow through design of the mesh drastically reduces wind drag and flag whip
making it a good choice not only for ATV flags but also for highway and off road vehicles
to sand rails, UTV's, side by sides,dune buggies,
snowmobile or use as marker safety flags.

Flag measures approximately 9x14, casing fits up to a 1 inch pole.
Use as a replacement flag for larger lighted led whips, boats, 4x4's or
other specialty applications where a larger pole is used.
Made in the USA

$5.95ea

Qty:


These items are sold without warranty, expressed or implied
except for quality of construction.
No warranty or representation is made as to any product's ability to protect the user from accident or injury.
The user/purchaser assumes that risk.



home | contact | gallery | about |          
flags | gear | sale